Customization FAQ
All
Customization FAQ

Customization FAQ

Can you take over production mid-season?

Yes, and it is a routine job — but only when the incoming specification is complete. Taking over a running line is not the same as starting a new one. The product already exists, already has artwork, and already has a customer base that will notice any change. The work is matching, not inventing. The realistic timing: samples in 7 days from final artwork, 7 days for your side to confirm, then a purchase order. That puts the first bulk run roughly half a month after approval, with production itself inside the standard 25–35 day window. What we need before quoting a transfer ItemWhy it decides the quoteWhat to send Current specificationThickness, adhesive class and liner set the coating recipe; a missing value becomes a guess on our sideThe supplier spec sheet, or a physical sample Dieline and artworkDetermines whether existing tooling can be reused or a new die is neededVector file with the die line on a separate layer Tooling ownershipIf you own the die, it can move with you; if the incumbent does, the shape is re-cutPurchase record or the clause from your agreement Pack formatPouch dimensions, print method and count per pack set the packing line and the price stepA finished pack, plus the film structure if known Regulatory positionUS facility registration and EU responsible-person arrangements belong to the entity placing the product on the market, not to the factoryWhich markets, and who holds the registration Volume and cadenceA monthly reorder pattern and a twice-yearly container are priced differentlyUnits per order, orders per year, target first delivery Colour referencesMatching a running colour needs the actual reference, not a photographPhysical colour standard, or the Pantone code if printed Remaining stockDecides whether we run a parallel batch or wait for a clean cut-overWeeks of cover at current sell-through The four stages, and what can go wrong in each 1. Specification match. We read your existing spec and say which values we can hit exactly and which need a tolerance band. The honest answer sometimes includes a value we cannot reproduce — an adhesive from a supplier who does not sell to us, for example. That is worth hearing before the sample, not after. 2. Sample against your reference. The sample is compared to a physical reference, not to a description. This is the stage where a trial run reveals whether the colour reads the same under retail lighting and whether the peel feel survives the liner change. 3. Golden sample and approval. Once approved, the retained sample becomes the standard for the batch record. Six things get locked: mass thickness, adhesive coat weight, liner, die line, print colour, and pack construction. 4. First bulk run and parallel cover. Most brands run one overlapping batch so the shelf never empties. The first production batch is inspected against the golden sample, and the batch record travels with the shipment. A transfer lands on running lines, not on a new set-up. The first bulk batch is compared against the retained golden sample, and the batch record travels with the shipment. The single most common cause of a failed transfer: artwork supplied as a flattened image instead of a layered vector. The die line then has to be redrawn from the print, and a redrawn die line is a new die line — with a new tolerance and a new sample round. When a mid-season transfer is the wrong move Fewer than eight weeks of cover and no approved sample. A transfer cannot be compressed past the sample round without accepting a mismatch risk you will pay for at retail. The product carries a claim tied to a specific formulation. If the pack text names an active at a stated level, changing the mass means re-checking the claim, not just matching the appearance. Character or licensed artwork without documentation. We produce licensed programmes where the licence is held by the brand owner and granted to our client. Without that chain in writing, the artwork cannot be run. In those cases the better plan is a staged switch: keep the current supplier for the season, qualify the replacement in parallel, and cut over at the next packaging change. That costs less than a rushed launch and a recall. What the first quote will look like We quote per design at a 1,000 unit minimum, with the price step stated for the volume band you expect. Tooling is charged once and, once paid, belongs to you — held in our workshop and used only for your orders. If you already own a die that fits our press, it can be transferred in and inspected rather than re-cut. Two documents come with the first shipment: the batch record and the inspection result against the approved sample. Both are what an auditor asks for, and both are easier to obtain at the start of a relationship than to reconstruct later. Background on how the factory is set up — 8 coating lines, 60–120 cm web width, ISO 13485 certificate 69136 — is in what a patch manufacturer actually sells you. If the transfer involves a formula rather than a design, ODM: when you want the formula sets out what ownership looks like. And if you are matching a competitor's sample rather than your own, the five parameters that have to be measured are covered in matching a sample from another supplier. Send the current spec sheet and one finished pack. We will come back with what matches exactly, what needs a tolerance band, and what the first run would cost at 1,000 units per design. Request a transfer assessment

OEM or ODM — what is the practical difference?

.blog-detail-psc { --psc-primary: #009ebc; --psc-secondary: #95c51a; --psc-ink: #333333; --psc-muted: #6f6f6f; --psc-line: rgba(51,51,51,0.12); --psc-wash: rgba(0,158,188,0.07); --psc-grad: linear-gradient(90deg, var(--psc-secondary) 0%, var(--psc-primary) 100%); display: block; font-family: inherit; font-size: 17px; line-height: 1.8; color: var(--psc-ink); } .blog-detail-psc h2 { font-family: inherit !important; font-weight: 600 !important; line-height: 1.35 !important; font-size: min(calc(1.1vw + 16px), 34px) !important; color: var(--psc-ink) !important; margin: calc(1.6vw + 18px) 0 calc(0.5vw + 8px); } .blog-detail-psc h3 { font-family: inherit !important; font-weight: 600 !important; line-height: 1.45 !important; font-size: calc(0.35vw + 16px) !important; color: var(--psc-ink) !important; margin: calc(1.1vw + 12px) 0 calc(0.3vw + 5px); } .blog-detail-psc p { margin: 0 0 calc(0.6vw + 8px); font-size: calc(0.15vw + 15px); } .blog-detail-psc a { color: var(--psc-primary) !important; text-decoration: none; border-bottom: 1px solid rgba(0,158,188,0.35); transition: color .25s ease, border-color .25s ease; } .blog-detail-psc a:hover { color: var(--psc-secondary) !important; border-color: var(--psc-secondary); } .blog-detail-psc img { display: block; max-width: 100%; height: auto; } .blog-detail-psc .psc-lead { margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); padding: calc(0.8vw + 10px) calc(1vw + 12px); background: var(--psc-wash); border-left: 3px solid var(--psc-primary); border-radius: 0 calc(0.4vw + 6px) calc(0.4vw + 6px) 0; } .blog-detail-psc .psc-lead p { margin: 0; font-size: calc(0.2vw + 15px); } .blog-detail-psc .psc-figure { margin: calc(0.9vw + 10px) 0 calc(1.1vw + 12px); } .blog-detail-psc .psc-figure img { width: 100%; border-radius: calc(0.4vw + 8px); object-fit: cover; } .blog-detail-psc .psc-figure figcaption { margin-top: calc(0.2vw + 6px); font-size: 13px; color: var(--psc-muted); line-height: 1.6; } .blog-detail-psc .psc-grid { display: grid; grid-template-columns: repeat(2, minmax(0,1fr)); gap: calc(0.5vw + 8px); margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); counter-reset: psc; } .blog-detail-psc .psc-card { display: flex; gap: calc(0.4vw + 8px); align-items: flex-start; padding: calc(0.5vw + 8px) calc(0.6vw + 10px); border: 1px solid var(--psc-line); border-radius: calc(0.35vw + 6px); box-sizing: border-box; counter-increment: psc; transition: transform .25s ease, box-shadow .25s ease, border-color .25s ease; } .blog-detail-psc .psc-card:hover { transform: translateY(-3px); box-shadow: 0 12px 24px rgba(0,158,188,0.12); border-color: rgba(0,158,188,0.35); } .blog-detail-psc .psc-card::before { content: counter(psc, decimal-leading-zero); flex: 0 0 auto; font-size: 13px; font-weight: 600; line-height: 1.6; color: var(--psc-primary); letter-spacing: .04em; } .blog-detail-psc .psc-card p { margin: 0; font-size: calc(0.05vw + 14px); line-height: 1.6; } .blog-detail-psc .psc-num { display: inline-block; min-width: 1.6em; color: var(--psc-primary); font-variant-numeric: tabular-nums; } .blog-detail-psc .psc-ask { margin: 0 0 calc(0.35vw + 4px); } .blog-detail-psc .psc-ask b { color: var(--psc-ink); } .blog-detail-psc .psc-flag { margin: calc(0.35vw + 4px) 0 calc(0.9vw + 8px); padding: calc(0.45vw + 7px) calc(0.7vw + 10px); background: rgba(200,60,40,0.05); border-left: 3px solid rgba(200,60,40,0.55); border-radius: 0 calc(0.3vw + 5px) calc(0.3vw + 5px) 0; } .blog-detail-psc .psc-flag p { margin: 0; font-size: calc(0.05vw + 14px); } .blog-detail-psc .psc-flag b { color: #b4392a; } .blog-detail-psc .psc-matrix { margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); border: 1px solid var(--psc-line); border-radius: calc(0.4vw + 6px); overflow: hidden; } .blog-detail-psc .psc-matrix-row { display: grid; grid-template-columns: 190px minmax(0,1fr); border-top: 1px solid var(--psc-line); } .blog-detail-psc .psc-matrix-row:first-child { border-top: 0; } .blog-detail-psc .psc-matrix-row div { padding: calc(0.5vw + 8px) calc(0.7vw + 10px); } .blog-detail-psc .psc-matrix-row div:first-child { background: var(--psc-wash); font-weight: 600; font-size: calc(0.05vw + 14px); border-right: 1px solid var(--psc-line); } .blog-detail-psc .psc-matrix-row div:last-child { font-size: calc(0.05vw + 14px); } .blog-detail-psc .psc-matrix-row p { margin: 0; } .blog-detail-psc .psc-actions { margin: calc(1.2vw + 14px) 0 calc(0.6vw + 6px); padding: calc(1vw + 12px); background: var(--psc-wash); border-radius: calc(0.5vw + 8px); text-align: center; } .blog-detail-psc .psc-actions p { margin: 0 0 calc(0.5vw + 8px); } .blog-detail-psc .psc-btn { display: inline-block; padding: calc(0.4vw + 8px) calc(1.1vw + 18px); background: var(--psc-grad); color: #fff !important; border: 0 !important; border-radius: 100px; font-weight: 600; font-size: 15px; box-shadow: 0 8px 20px rgba(0,158,188,0.22); transition: box-shadow .25s ease, transform .25s ease; } .blog-detail-psc .psc-btn:hover { color: #fff !important; transform: translateY(-2px); box-shadow: 0 14px 28px rgba(149,197,26,0.3); } .blog-detail-psc .psc-meta { margin-top: calc(0.8vw + 8px); padding-top: calc(0.6vw + 8px); border-top: 1px solid var(--psc-line); font-size: 13px; color: var(--psc-muted); } @media (max-width: 900px) { .blog-detail-psc .psc-grid { grid-template-columns: minmax(0,1fr); } } @media (max-width: 640px) { .blog-detail-psc .psc-matrix-row { grid-template-columns: minmax(0,1fr); } .blog-detail-psc .psc-matrix-row div:first-child { border-right: 0; border-bottom: 1px solid var(--psc-line); } } .blog-detail-psc .psc-table { margin: calc(0.8vw + 10px) 0 calc(1vw + 12px); border-top: 1px solid var(--psc-line); } .blog-detail-psc .psc-table-row { display: grid; grid-template-columns: 0.9fr 1.1fr 1.25fr; gap: 10px; padding: calc(0.35vw + 9px) 0; border-bottom: 1px solid var(--psc-line); align-items: start; } .blog-detail-psc .psc-table-row div { min-width: 0; font-size: calc(0.05vw + 14px); line-height: 1.55; } .blog-detail-psc .psc-table-head div { font-size: 12.5px; letter-spacing: .06em; text-transform: uppercase; color: var(--psc-muted); font-weight: 600; } .blog-detail-psc .psc-table-head { border-bottom: 1px solid var(--psc-line); } @media (max-width: 640px) { .blog-detail-psc .psc-table-row { grid-template-columns: 1fr; gap: 2px; padding: calc(0.6vw + 10px) 0; } .blog-detail-psc .psc-table-head { display: none; } .blog-detail-psc .psc-table-row div:first-child { font-weight: 600; font-size: calc(0.1vw + 15px); } } .blog-detail-psc .psc-figure svg { max-width: 560px; display: block; margin: 0 auto; width: 100%; } .blog-detail-psc .psc-flag ol { margin: 8px 0 0; padding-left: 22px; } .blog-detail-psc .psc-flag li { margin: 0 0 6px; font-size: calc(0.05vw + 14px); line-height: 1.6; } .blog-detail-psc .psc-flag li:last-child { margin-bottom: 0; } @media (max-width: 640px) { .blog-detail-psc .psc-table { border-top: 0; margin: calc(0.6vw + 10px) 0 calc(0.8vw + 10px); } .blog-detail-psc .psc-table-row { grid-template-columns: minmax(0, 1fr); gap: 0; padding: 14px 16px; border: 1px solid var(--psc-line); border-radius: 10px; margin: 0 0 10px; background: #fbfcfd; } .blog-detail-psc .psc-table-row div { padding: 0; min-width: 0; } .blog-detail-psc .psc-table-row div:first-child { font-weight: 700; font-size: 15px; line-height: 1.45; padding-bottom: 9px; margin-bottom: 9px; border-bottom: 1px solid var(--psc-line); } .blog-detail-psc .psc-table-row div + div { font-size: 13.8px; line-height: 1.6; padding-top: 3px; } } /* mobile: per-table labels so the stacked cells stay readable */ @media (max-width: 640px) { .blog-detail-psc .psc-table-row div + div { position: relative; } .blog-detail-psc .psc-table-row div + div::before { display: block; font-size: 10.5px; line-height: 1.4; letter-spacing: .07em; text-transform: uppercase; color: var(--psc-muted); font-weight: 600; margin-bottom: 2px; } .blog-detail-psc .psc-t1 .psc-table-row div:nth-child(2)::before { content: "What it controls"; } .blog-detail-psc .psc-t1 .psc-table-row div:nth-child(3)::before { content: "What breaks if you change it alone"; } .blog-detail-psc .psc-t2 .psc-table-row div:nth-child(2)::before { content: "What it takes"; } .blog-detail-psc .psc-t2 .psc-table-row div:nth-child(3)::before { content: "Typical effect on timeline"; } .blog-detail-psc .psc-c1 .psc-table-row div:nth-child(2)::before { content: "What the skin needs"; } .blog-detail-psc .psc-c1 .psc-table-row div:nth-child(3)::before { content: "Patch configuration"; } .blog-detail-psc .psc-c2 .psc-table-row div:nth-child(2)::before { content: "Where it fits"; } .blog-detail-psc .psc-c2 .psc-table-row div:nth-child(3)::before { content: "Trade-off"; } } @media (max-width: 640px) { .blog-detail-psc .psc-b1 .psc-table-row div:nth-child(2)::before { content: "What it covers"; } .blog-detail-psc .psc-b1 .psc-table-row div:nth-child(3)::before { content: "Repeats per order?"; } .blog-detail-psc .psc-b2 .psc-table-row div:nth-child(2)::before { content: "At 1,000 units"; } .blog-detail-psc .psc-b2 .psc-table-row div:nth-child(3)::before { content: "At large volume"; } .blog-detail-psc .psc-b3 .psc-table-row div:nth-child(2)::before { content: "You can say"; } .blog-detail-psc .psc-b3 .psc-table-row div:nth-child(3)::before { content: "Do not say"; } } .blog-detail-psc .psc-e2 .psc-table-row { grid-template-columns: 0.85fr 1fr 1fr 1fr; } @media (max-width: 640px) { .blog-detail-psc .psc-e2 .psc-table-row { grid-template-columns: minmax(0, 1fr) !important; } .blog-detail-psc .psc-w1 .psc-table-row div:nth-child(2)::before { content: "What it changes"; } .blog-detail-psc .psc-w1 .psc-table-row div:nth-child(3)::before { content: "When it hurts"; } .blog-detail-psc .psc-w2 .psc-table-row div:nth-child(2)::before { content: "Standard term"; } .blog-detail-psc .psc-w2 .psc-table-row div:nth-child(3)::before { content: "What unlocks a change"; } .blog-detail-psc .psc-e1 .psc-table-row div:nth-child(2)::before { content: "Issued by"; } .blog-detail-psc .psc-e1 .psc-table-row div:nth-child(3)::before { content: "What goes wrong"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(2)::before { content: "We cover"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(3)::before { content: "You cover"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(4)::before { content: "Where risk passes"; } .blog-detail-psc .psc-e3 .psc-table-row div:nth-child(2)::before { content: "What it costs"; } .blog-detail-psc .psc-e3 .psc-table-row div:nth-child(3)::before { content: "What we need to see"; } } .psc-quote{margin:calc(0.6vw + 6px) 0 calc(1vw + 10px);padding:calc(0.7vw + 9px) calc(0.9vw + 11px);background:var(--psc-wash);border-left:3px solid var(--psc-primary);border-radius:0 calc(0.4vw + 6px) calc(0.4vw + 6px) 0} .psc-quote p{margin:0 !important;font-weight:600} .psc-t2 .psc-table-row{grid-template-columns:1fr 1.6fr} .psc-t3 .psc-table-row{grid-template-columns:.9fr 1.1fr 1.25fr} .psc-t4 .psc-table-row{grid-template-columns:.9fr 1fr 1fr 1.1fr} @media (max-width:640px){.psc-t2 .psc-table-row,.psc-t3 .psc-table-row,.psc-t4 .psc-table-row{grid-template-columns:1fr !important}} OEM means you bring the design; ODM means you adopt one. The practical difference is not who is cleverer — it is who owns the die, who owns the formula, and how long the first order takes. The same table, both columns DimensionOEMODMWhat it changes for you Design originYour die, your artwork, your packOur existing construction, your brandingLead time and tooling cost Die ownershipYours — paid once, yours to moveOurs, shared across customersExclusivity of shape FormulaYours, or developed to your specOur standard hydrocolloid platformWhether a competitor can buy the same patch Time to first shipment7–10 days sample, then 25–35 days bulkFaster — no new die, no new trialLaunch date Three questions that decide it 1. Is the shape part of your brand? If a customer would recognise the patch without the box, you need your own die. If not, ODM is cheaper and faster. 2. Can someone else sell your SKU? Under ODM, the same construction is available to other brands. If that is unacceptable, you need OEM — or an exclusivity term written into the ODM agreement. 3. Do you have artwork and a pack ready? OEM assumes you arrive with a die drawing and print-ready files. Arriving without them turns OEM into a design project with a manufacturing deadline attached. The conversation is short if the three answers are on the table: shape ownership, exclusivity, and print-ready files. The hybrid nobody names Most real orders sit between the two: your die, our standard film and adhesive. You get a shape no competitor can copy, without paying to develop a construction. It is priced as OEM, sampled in the ODM timeline, and it is the arrangement we quote most often for first orders. What each costs you to start OEM carries a one-off die cost and one extra sample round. ODM carries neither — but it carries the risk that the patch is not exclusively yours. Minimum order is 1,000 units per design either way, and both run on the same 8 coating lines at our Hangzhou facility (ISO 13485, cert. 69136). Tell us which of the three questions you can answer, and we will say which model fits. Ask about OEM or ODM

Who owns the moulds and artwork?

.blog-detail-psc { --psc-primary: #009ebc; --psc-secondary: #95c51a; --psc-ink: #333333; --psc-muted: #6f6f6f; --psc-line: rgba(51,51,51,0.12); --psc-wash: rgba(0,158,188,0.07); --psc-grad: linear-gradient(90deg, var(--psc-secondary) 0%, var(--psc-primary) 100%); display: block; font-family: inherit; font-size: 17px; line-height: 1.8; color: var(--psc-ink); } .blog-detail-psc h2 { font-family: inherit !important; font-weight: 600 !important; line-height: 1.35 !important; font-size: min(calc(1.1vw + 16px), 34px) !important; color: var(--psc-ink) !important; margin: calc(1.6vw + 18px) 0 calc(0.5vw + 8px); } .blog-detail-psc h3 { font-family: inherit !important; font-weight: 600 !important; line-height: 1.45 !important; font-size: calc(0.35vw + 16px) !important; color: var(--psc-ink) !important; margin: calc(1.1vw + 12px) 0 calc(0.3vw + 5px); } .blog-detail-psc p { margin: 0 0 calc(0.6vw + 8px); font-size: calc(0.15vw + 15px); } .blog-detail-psc a { color: var(--psc-primary) !important; text-decoration: none; border-bottom: 1px solid rgba(0,158,188,0.35); transition: color .25s ease, border-color .25s ease; } .blog-detail-psc a:hover { color: var(--psc-secondary) !important; border-color: var(--psc-secondary); } .blog-detail-psc img { display: block; max-width: 100%; height: auto; } .blog-detail-psc .psc-lead { margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); padding: calc(0.8vw + 10px) calc(1vw + 12px); background: var(--psc-wash); border-left: 3px solid var(--psc-primary); border-radius: 0 calc(0.4vw + 6px) calc(0.4vw + 6px) 0; } .blog-detail-psc .psc-lead p { margin: 0; font-size: calc(0.2vw + 15px); } .blog-detail-psc .psc-figure { margin: calc(0.9vw + 10px) 0 calc(1.1vw + 12px); } .blog-detail-psc .psc-figure img { width: 100%; border-radius: calc(0.4vw + 8px); object-fit: cover; } .blog-detail-psc .psc-figure figcaption { margin-top: calc(0.2vw + 6px); font-size: 13px; color: var(--psc-muted); line-height: 1.6; } .blog-detail-psc .psc-grid { display: grid; grid-template-columns: repeat(2, minmax(0,1fr)); gap: calc(0.5vw + 8px); margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); counter-reset: psc; } .blog-detail-psc .psc-card { display: flex; gap: calc(0.4vw + 8px); align-items: flex-start; padding: calc(0.5vw + 8px) calc(0.6vw + 10px); border: 1px solid var(--psc-line); border-radius: calc(0.35vw + 6px); box-sizing: border-box; counter-increment: psc; transition: transform .25s ease, box-shadow .25s ease, border-color .25s ease; } .blog-detail-psc .psc-card:hover { transform: translateY(-3px); box-shadow: 0 12px 24px rgba(0,158,188,0.12); border-color: rgba(0,158,188,0.35); } .blog-detail-psc .psc-card::before { content: counter(psc, decimal-leading-zero); flex: 0 0 auto; font-size: 13px; font-weight: 600; line-height: 1.6; color: var(--psc-primary); letter-spacing: .04em; } .blog-detail-psc .psc-card p { margin: 0; font-size: calc(0.05vw + 14px); line-height: 1.6; } .blog-detail-psc .psc-num { display: inline-block; min-width: 1.6em; color: var(--psc-primary); font-variant-numeric: tabular-nums; } .blog-detail-psc .psc-ask { margin: 0 0 calc(0.35vw + 4px); } .blog-detail-psc .psc-ask b { color: var(--psc-ink); } .blog-detail-psc .psc-flag { margin: calc(0.35vw + 4px) 0 calc(0.9vw + 8px); padding: calc(0.45vw + 7px) calc(0.7vw + 10px); background: rgba(200,60,40,0.05); border-left: 3px solid rgba(200,60,40,0.55); border-radius: 0 calc(0.3vw + 5px) calc(0.3vw + 5px) 0; } .blog-detail-psc .psc-flag p { margin: 0; font-size: calc(0.05vw + 14px); } .blog-detail-psc .psc-flag b { color: #b4392a; } .blog-detail-psc .psc-matrix { margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); border: 1px solid var(--psc-line); border-radius: calc(0.4vw + 6px); overflow: hidden; } .blog-detail-psc .psc-matrix-row { display: grid; grid-template-columns: 190px minmax(0,1fr); border-top: 1px solid var(--psc-line); } .blog-detail-psc .psc-matrix-row:first-child { border-top: 0; } .blog-detail-psc .psc-matrix-row div { padding: calc(0.5vw + 8px) calc(0.7vw + 10px); } .blog-detail-psc .psc-matrix-row div:first-child { background: var(--psc-wash); font-weight: 600; font-size: calc(0.05vw + 14px); border-right: 1px solid var(--psc-line); } .blog-detail-psc .psc-matrix-row div:last-child { font-size: calc(0.05vw + 14px); } .blog-detail-psc .psc-matrix-row p { margin: 0; } .blog-detail-psc .psc-actions { margin: calc(1.2vw + 14px) 0 calc(0.6vw + 6px); padding: calc(1vw + 12px); background: var(--psc-wash); border-radius: calc(0.5vw + 8px); text-align: center; } .blog-detail-psc .psc-actions p { margin: 0 0 calc(0.5vw + 8px); } .blog-detail-psc .psc-btn { display: inline-block; padding: calc(0.4vw + 8px) calc(1.1vw + 18px); background: var(--psc-grad); color: #fff !important; border: 0 !important; border-radius: 100px; font-weight: 600; font-size: 15px; box-shadow: 0 8px 20px rgba(0,158,188,0.22); transition: box-shadow .25s ease, transform .25s ease; } .blog-detail-psc .psc-btn:hover { color: #fff !important; transform: translateY(-2px); box-shadow: 0 14px 28px rgba(149,197,26,0.3); } .blog-detail-psc .psc-meta { margin-top: calc(0.8vw + 8px); padding-top: calc(0.6vw + 8px); border-top: 1px solid var(--psc-line); font-size: 13px; color: var(--psc-muted); } @media (max-width: 900px) { .blog-detail-psc .psc-grid { grid-template-columns: minmax(0,1fr); } } @media (max-width: 640px) { .blog-detail-psc .psc-matrix-row { grid-template-columns: minmax(0,1fr); } .blog-detail-psc .psc-matrix-row div:first-child { border-right: 0; border-bottom: 1px solid var(--psc-line); } } .blog-detail-psc .psc-table { margin: calc(0.8vw + 10px) 0 calc(1vw + 12px); border-top: 1px solid var(--psc-line); } .blog-detail-psc .psc-table-row { display: grid; grid-template-columns: 0.9fr 1.1fr 1.25fr; gap: 10px; padding: calc(0.35vw + 9px) 0; border-bottom: 1px solid var(--psc-line); align-items: start; } .blog-detail-psc .psc-table-row div { min-width: 0; font-size: calc(0.05vw + 14px); line-height: 1.55; } .blog-detail-psc .psc-table-head div { font-size: 12.5px; letter-spacing: .06em; text-transform: uppercase; color: var(--psc-muted); font-weight: 600; } .blog-detail-psc .psc-table-head { border-bottom: 1px solid var(--psc-line); } @media (max-width: 640px) { .blog-detail-psc .psc-table-row { grid-template-columns: 1fr; gap: 2px; padding: calc(0.6vw + 10px) 0; } .blog-detail-psc .psc-table-head { display: none; } .blog-detail-psc .psc-table-row div:first-child { font-weight: 600; font-size: calc(0.1vw + 15px); } } .blog-detail-psc .psc-figure svg { max-width: 560px; display: block; margin: 0 auto; width: 100%; } .blog-detail-psc .psc-flag ol { margin: 8px 0 0; padding-left: 22px; } .blog-detail-psc .psc-flag li { margin: 0 0 6px; font-size: calc(0.05vw + 14px); line-height: 1.6; } .blog-detail-psc .psc-flag li:last-child { margin-bottom: 0; } @media (max-width: 640px) { .blog-detail-psc .psc-table { border-top: 0; margin: calc(0.6vw + 10px) 0 calc(0.8vw + 10px); } .blog-detail-psc .psc-table-row { grid-template-columns: minmax(0, 1fr); gap: 0; padding: 14px 16px; border: 1px solid var(--psc-line); border-radius: 10px; margin: 0 0 10px; background: #fbfcfd; } .blog-detail-psc .psc-table-row div { padding: 0; min-width: 0; } .blog-detail-psc .psc-table-row div:first-child { font-weight: 700; font-size: 15px; line-height: 1.45; padding-bottom: 9px; margin-bottom: 9px; border-bottom: 1px solid var(--psc-line); } .blog-detail-psc .psc-table-row div + div { font-size: 13.8px; line-height: 1.6; padding-top: 3px; } } /* mobile: per-table labels so the stacked cells stay readable */ @media (max-width: 640px) { .blog-detail-psc .psc-table-row div + div { position: relative; } .blog-detail-psc .psc-table-row div + div::before { display: block; font-size: 10.5px; line-height: 1.4; letter-spacing: .07em; text-transform: uppercase; color: var(--psc-muted); font-weight: 600; margin-bottom: 2px; } .blog-detail-psc .psc-t1 .psc-table-row div:nth-child(2)::before { content: "What it controls"; } .blog-detail-psc .psc-t1 .psc-table-row div:nth-child(3)::before { content: "What breaks if you change it alone"; } .blog-detail-psc .psc-t2 .psc-table-row div:nth-child(2)::before { content: "What it takes"; } .blog-detail-psc .psc-t2 .psc-table-row div:nth-child(3)::before { content: "Typical effect on timeline"; } .blog-detail-psc .psc-c1 .psc-table-row div:nth-child(2)::before { content: "What the skin needs"; } .blog-detail-psc .psc-c1 .psc-table-row div:nth-child(3)::before { content: "Patch configuration"; } .blog-detail-psc .psc-c2 .psc-table-row div:nth-child(2)::before { content: "Where it fits"; } .blog-detail-psc .psc-c2 .psc-table-row div:nth-child(3)::before { content: "Trade-off"; } } @media (max-width: 640px) { .blog-detail-psc .psc-b1 .psc-table-row div:nth-child(2)::before { content: "What it covers"; } .blog-detail-psc .psc-b1 .psc-table-row div:nth-child(3)::before { content: "Repeats per order?"; } .blog-detail-psc .psc-b2 .psc-table-row div:nth-child(2)::before { content: "At 1,000 units"; } .blog-detail-psc .psc-b2 .psc-table-row div:nth-child(3)::before { content: "At large volume"; } .blog-detail-psc .psc-b3 .psc-table-row div:nth-child(2)::before { content: "You can say"; } .blog-detail-psc .psc-b3 .psc-table-row div:nth-child(3)::before { content: "Do not say"; } } .blog-detail-psc .psc-e2 .psc-table-row { grid-template-columns: 0.85fr 1fr 1fr 1fr; } @media (max-width: 640px) { .blog-detail-psc .psc-e2 .psc-table-row { grid-template-columns: minmax(0, 1fr) !important; } .blog-detail-psc .psc-w1 .psc-table-row div:nth-child(2)::before { content: "What it changes"; } .blog-detail-psc .psc-w1 .psc-table-row div:nth-child(3)::before { content: "When it hurts"; } .blog-detail-psc .psc-w2 .psc-table-row div:nth-child(2)::before { content: "Standard term"; } .blog-detail-psc .psc-w2 .psc-table-row div:nth-child(3)::before { content: "What unlocks a change"; } .blog-detail-psc .psc-e1 .psc-table-row div:nth-child(2)::before { content: "Issued by"; } .blog-detail-psc .psc-e1 .psc-table-row div:nth-child(3)::before { content: "What goes wrong"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(2)::before { content: "We cover"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(3)::before { content: "You cover"; } .blog-detail-psc .psc-e2 .psc-table-row div:nth-child(4)::before { content: "Where risk passes"; } .blog-detail-psc .psc-e3 .psc-table-row div:nth-child(2)::before { content: "What it costs"; } .blog-detail-psc .psc-e3 .psc-table-row div:nth-child(3)::before { content: "What we need to see"; } } .psc-quote { margin: calc(0.6vw + 6px) 0 calc(1vw + 10px); padding: calc(0.7vw + 9px) calc(0.9vw + 11px); background: var(--psc-wash); border-left: 3px solid var(--psc-primary); border-radius: 0 calc(0.4vw + 6px) calc(0.4vw + 6px) 0; } .psc-quote p { margin: 0 !important; font-size: 1.05em; line-height: 1.7; } .psc-t2 .psc-table-row { grid-template-columns: 1fr 1.5fr; } .psc-t3 .psc-table-row { grid-template-columns: 0.9fr 1.1fr 1.25fr; } .psc-t4 .psc-table-row { grid-template-columns: 0.9fr 1fr 1fr 1.08fr; } @media (max-width: 640px) { .psc-t2 .psc-table-row, .psc-t3 .psc-table-row, .psc-t4 .psc-table-row { grid-template-columns: minmax(0, 1fr) !important; } } Short answer: if you paid for the die, the die is yours. The artwork is yours the moment you send it. What we hold is custody, not ownership — and the only thing that makes that real is a clause in the contract rather than an assumption in an email. Who owns what, line by line ItemWho paysWho owns itHow we hold it Cutting die for your shapeYou, once, at tooling stageYouStored in our tooling room, used only for your orders Artwork, dielines, colour targetsYouYouArchived against your account as production files Print plates and colour proofsYou, via the print setup chargeYouHeld for reprints; remade at your cost if a design changes Standard shapes and stock mouldsUsUsShared across customers — no exclusivity implied The last row is where most disputes start. Star, heart, circle and the common rounded-square shapes come from tooling we already own; ordering one of those gives you a product, not a design right. A die made specifically to your drawing is a different object, and that one follows your payment. A custom shape is a die plus a print file — the two things a buyer should confirm ownership of before tooling starts. Three clauses to write into the contract ClauseWording that worksWhat it prevents Ownership on payment“The die and artwork become the property of the buyer upon payment of the tooling invoice.”A supplier reusing your shape for another brand Use restriction“The supplier shall use the die solely for orders placed by the buyer.”Your shape appearing in a competitor’s catalogue Return or destruction“On termination the supplier shall return the die or destroy it and certify destruction in writing.”Tooling stranded with no route out What happens when the relationship ends Three options, and it is better to choose one now than to negotiate it in a bad month. The die can be shipped to you or to your next supplier at your cost, which is the cleanest exit. It can stay with us under a storage arrangement, which keeps reorders possible but ties you to us for lead time. Or it can be destroyed against a written certificate, which is what most buyers choose when the design is being retired for legal reasons rather than commercial ones. Artwork is simpler: the production files are returned on request, and we keep a copy only for as long as we are obliged to keep batch records. What we will not do is keep using a retired design on someone else’s pack. Where ODM differs from OEM In OEM you bring the design and the die follows your payment. In ODM you are choosing from formulas and shapes we already run, so the tooling stays ours and other customers can order the same construction. That is not a worse deal — it is a faster one, with a shorter tooling stage and no setup invoice. It just does not come with exclusivity, and confusing the two is how buyers end up disappointed. ModelWho owns the dieWho owns the formulaCan another brand order the same? OEMYouYou or licensed to youNo, for the shape you paid for ODMUsUsYes — that is the model Private labelDepends on shapeUsually oursYes, for stock shapes The two questions to ask before paying tooling First: is this shape new, or is it a stock die you already hold? The answer changes what you are buying and what it should cost. Second: does the tooling invoice state ownership, or does it only state a price? A tooling charge with no ownership clause buys you a production run, not an asset — and we would rather tell you that before you pay than after. Ask about tooling and ownership Henso Biotech manufactures hydrocolloid, microdart and printed acne patches in Hangzhou — ISO 13485 (cert. 69136), FDA facility registration FEI 3012706495, exporting to 29+ countries. Tooling ownership is settled in the supply agreement; this page describes our standard practice and is not legal advice for your jurisdiction.

Does the pack have to show your factory name?

Short answer: yes — the pack does not have to carry our factory name or address, and for private label it usually should not. What the pack must carry is a name and address of the party responsible in that market, which is normally your brand or your appointed representative. Those are two different things, and confusing them is how a launch gets stopped at the border. Why private label packs drop the factory line Retail buyers read a visible factory name as a signal that the product is a repack, not a brand. It also hands a competitor your source in one glance at the shelf. Neither is a compliance problem — it is a commercial one, and it is legitimate to solve. The line that cannot be solved by omission is the responsible-party information. That exists so a regulator can find someone accountable in their own jurisdiction. What each market actually requires EU — responsible person is mandatory A responsible person established in the EU must be named with an address. For goods made outside the EU that party is normally your brand's EU entity or an appointed representative — not the Chinese manufacturer. Omitting the factory name is fine; omitting this line is not. US — distributor name is acceptable Cosmetic labelling allows the name and place of business of the manufacturer, packer or distributor. Naming only your brand as distributor is the common private-label route, and it is what most US retail buyers expect to see. UK — same structure, UK address Post-Brexit the UK needs a UK-established responsible party. An EU address alone does not satisfy it, which is the single most common gap we see on UK-bound artwork. If the product is positioned on a device route rather than a cosmetic one, the manufacturer's identity usually becomes part of the technical file and the label in a way it is not for cosmetics — so decide the route before the artwork, exactly as you would for a claim. Where the factory name cannot disappear Export documents The commercial invoice, packing list and certificate of origin describe who made the goods and where. Ours say Hangzhou. This is not negotiable and it is not the same document as the pack. Batch records and COA Traceability runs back to our line and batch number. Your customers never see it; your auditor will ask for it. Product liability A private-label agreement still names the actual manufacturer internally. Removing the mark from the pack does not remove the manufacturer from the contract. What we will not do We will not describe a party other than the actual producer as the manufacturer on a certificate of origin, and we will not issue paperwork that contradicts the pack. Hiding a factory line from consumers is normal private label; misstating origin on customs documents is a different act entirely. How to set it up in one pass Three decisions, all taken before the artwork proof: who is the responsible party for each destination market and what exactly prints; whether the barcode is your GS1 prefix or ours (it should be yours, since you own the listing); and which pack components carry the mark — box only, or pouch too, since the pouch is often printed in the same run and reprinting it later is a production order. Send us the responsible-party wording, the barcode ownership and the destination list, and we will return an artwork proof with the factory line already removed and the mandatory lines already in place. Sample lead time is 7–10 days, so the earlier those three answers arrive, the fewer proof rounds the artwork needs. This answer describes how we handle private-label artwork and export documentation. Labelling requirements differ by route and market; confirm the final wording with your regulatory advisor before print.

Can you reserve a production slot for a Q4 launch?

Short answer: yes, but a slot is held by a purchase order and a deposit, not by a conversation. Q4 is when coating lines, die cutting and packing are all committed at once, and a factory that says "we will find room" in September is telling you it has not looked at its schedule. How a slot actually gets reserved Step one — forecast Tell us the size, pack format and rough quantity, and the month you need goods in hand. We answer with a realistic window, not an optimistic one. Step two — hold We mark the window as provisionally held and tell you the date it lapses. Holds are short in peak season because the next buyer is waiting. Step three — confirm Purchase order plus deposit converts the hold into a scheduled run. From that point the line time is yours, and artwork changes start costing days rather than minutes. Work backwards from the delivery date, not forwards from today Two lead times decide the calendar. Samples take 7–10 days; mass production runs 25–35 days from approval. Add freight, and a Q4 launch that needs goods in a US warehouse by mid-November has to have an approved sample in hand well before the end of September. The step buyers underestimate is approval, not production. A sample that arrives and sits on a desk for two weeks removes the buffer that was built into the schedule — and that buffer is the only thing standing between a normal run and air freight. What cancels a reserved slot Artwork not released, sample not signed, deposit not received, or a pack format change after the die was ordered. Any one of these moves the run behind orders that are already confirmed — which is why we confirm the schedule in writing rather than by phone. If you are already late There is still room to move, but the levers change. Splitting the order lets part of it ship on the original date; taking a stock size and pack instead of a bespoke die removes tooling time; air freight for the first tranche protects the shelf date while the balance travels by sea. None of these are ideal, and all of them are cheaper than missing the launch. What to send Size, thickness, pack format, quantity, destination port and the date goods must be available. Five lines is enough for us to tell you whether the window exists — and if it does not, to tell you that on the same day rather than three weeks later. Henso Biotech manufactures in Hangzhou with eight coating lines; capacity is allocated in the order deposits are received. Lead times quoted here are our standard windows and are confirmed per order in writing.

Can you invoice a Hong Kong entity instead of the end buyer?

Short answer: yes. We can invoice a Hong Kong entity instead of the end buyer, provided the HK entity is the party that actually pays. The goods still ship from our Hangzhou factory, so the origin, the export documents and the compliance file do not change — only the invoice header, the currency and the consignee details do. Why buyers ask for this Three structures come up again and again: a trading company in Hong Kong buying on behalf of a downstream buyer; a brand that holds its IP and banking in Hong Kong but sells into the EU or US; and a group with a HK procurement hub that consolidates orders from several markets. In all three, the invoice has to match the entity that moves the money — otherwise the payment, the customs entry and the accounting trail disagree with each other. What we need from you Entity Full registered name, registered address and business registration number of the HK entity. The name on the invoice must match the bank account that pays it. Consignee Who receives the goods, and where. The invoicing entity and the consignee are frequently different — tell us both, in writing. Commercial terms Currency (USD, EUR or HKD) and Incoterm. The Incoterm decides where our responsibility ends, so it has to appear on the same document as the price. What does not change Origin stays China. Goods are manufactured in Hangzhou under ISO 13485 (cert. 69136) and FDA facility registration FEI 3012706495, and the export paperwork — commercial invoice, packing list, certificate of analysis per batch — is issued against the shipment, not against the invoicing address. If your market requires a specific declaration or a chamber-of-commerce stamp, tell us at quotation stage; adding it after the goods are packed is where delays start. One thing we will not do We will not invoice an entity that is not paying, and we will not split an invoice to help a buyer avoid a customs threshold. Both create a mismatch between goods, payment and declaration, and that mismatch lands on the importer, not on us. Send this and you get a quote the same week Entity name and registration number, consignee, currency, Incoterm, plus the product spec (size, thickness, pack format, quantity). With those five items we can issue a quote that will survive your finance team's review. Without the entity details, we can only quote the end buyer, and the invoice gets reissued later — which is exactly the step that costs a week. This answer describes how we handle invoicing and shipping documents. It is not tax, customs or legal advice for your jurisdiction — confirm the treatment with your own advisor before you rely on it.

Can the patch be thin enough to wear under makeup?

Short answer: yes, and the limit is not thickness — it is edge behaviour. A thin patch disappears under foundation only if the edge is tapered and the matrix does not swell sideways as it absorbs. A patch that is thin but blunt-edged will show a ridge within an hour, whatever the caliper says. What "thin enough" actually means Two numbers get confused. Total caliper is what buyers quote; the number the wearer experiences is how far the edge stands off the skin after ten minutes of movement. A 0.3 mm sheet with a hard cut edge reads thicker than a 0.45 mm sheet with a tapered edge, because the taper lets the outline follow the skin instead of cutting a step into it. So the specification to ask for is a pair: caliper plus edge treatment. Quoting one without the other is where most "under makeup" claims fall apart in the first sampling round. Three things that decide whether it disappears Factor Why it shows What to specify Edge profile A blunt cut creates a visible step that catches powder Tapered edge, thinned to the outline Swelling The matrix takes on fluid and rises under the foundation Lower uptake for daytime SKUs; shorter wear window Translucency A milky film changes the shade of the foundation above it Clear or skin-tone-matched film, tested on more than one tone The daytime and overnight split Thin and highly absorbent are competing properties. A patch thin enough to vanish under makeup holds less fluid, so it is the wrong choice for a large, still-active spot overnight. The practical answer most brands end up with is two SKUs: a thin tapered daytime patch, and a thicker one for sleep — and packaging that makes the difference obvious rather than leaving the buyer to guess. This is also why we ask what the patch is for before quoting a caliper. "As thin as possible" produces a product that looks invisible in a photo and lifts in the first hour of wear. Testing it before you commit A sample can only tell you so much. Ask for the patch to be worn under foundation for a full day, on a moving area — jawline or cheek, not the back of a hand. Look at three moments: immediately after application, after four hours, and after removal, when you can see whether the edge has left a ring or taken surface cells with it. If the trial fails, the fix is usually edge geometry or uptake, not a thinner sheet. Cutting caliper further tends to trade a visible ridge for an early lift. Tell us the wear window and skin tone range, and we will quote the caliper and edge that fit. Request a daytime sample

How do you keep adhesive residue off the skin on removal?

Short answer: residue is decided at the formulation stage, not at removal. A patch that leaves glue behind is usually one where peel strength was set for grip and never tested against sebum. We specify peel on a steel plate and again after a sebum soak, and we keep the release liner matched to the adhesive so the glue stays on the patch until it reaches skin. Why a patch that holds well can still leave residue Adhesion and residue pull in opposite directions. More grip means the patch survives a night on an oily cheek — and means more force is needed to take it off, which is exactly when part of the adhesive stays behind. A good specification does not pick one side. It sets a peel value high enough to hold for the stated wear time and low enough to release cleanly after it. The variable most buyers miss is time: the same adhesive that releases cleanly after four hours can leave a film after twelve, because the matrix has softened against the skin. The four levers we adjust Lever What it changes Watch for Adhesive coat weight Absolute grip level Too light and the edge lifts in the first hour Adhesive chemistry How it behaves against oil and heat A softer gel adhesive holds better but smears on removal Release liner Whether glue transfers to the liner or to skin A mismatched liner peels the adhesive off the matrix before use Edge taper How force distributes when you lift a corner A blunt edge concentrates pull and takes surface cells with it These are not independent. Raising coat weight to survive a humid summer usually means retesting residue in the same conditions, which is why we quote a wear window alongside the specification rather than a single "strong adhesion" claim. How removal is meant to work Peel slowly, parallel to the skin, after the patch has been in place for its stated time — not straight up, and not on dry skin after a night without washing. Warm water or a shower softens the adhesive enough that most of the release happens without force. If a patch is genuinely difficult to remove cold, that is a specification problem worth raising rather than a technique problem. What to ask a supplier Ask for the peel value and the method behind it, then ask whether the same test was repeated after a sebum or sweat soak. A supplier who can only quote one number has usually tested one condition. Ask, too, whether the liner was chosen with the adhesive or inherited from a previous product — the second case is the common source of patches that arrive with the adhesive already stuck to the release paper. Tell us your wear time and skin type, and we will quote the adhesive that matches both. Ask about peel and residue

Can you match a sample from another supplier?

Short answer: Usually yes, and we tell you within a few days where we cannot. Matching starts with measurement, not with a formula: thickness, absorbency, peel and liner release are read off your sample, and the result is a specification you can compare line by line. Sampling then runs seven days from an agreed spec. The reason to be precise about this: "match this" usually means "this, but better" — a patch that holds longer, sits flatter, or peels without pulling. If nobody writes down which property is being fixed, the sample that comes back is a match to the wrong thing. What we measure on your sample ParameterHow it is readWhat it decides Thickness Micrometer, several points across the sheet Absorbency headroom, and how flat it wears Absorbency Fluid uptake per unit area, timed to saturation Overnight versus daytime use Peel adhesion Tensile test at a controlled rate Holding on oily skin without pulling on removal Liner release Liner peeled at a set speed Whether the patch curls before it reaches the face Profile Outline, edge taper and dimensions The die, and whether a new one is needed What a match does not include Their formulation. If the matrix is a proprietary blend we cannot see inside it. We match measured behaviour within the tolerances on the specification — not chemical identity. Say so early if an identical matrix is a regulatory requirement rather than a preference. Their die. A tool belongs to whoever paid for it. If the outline in your sample is their property, copying it invites a claim; a die that is close but not identical is charged once and becomes yours. Their print. Licensed character artwork is the clearest case — it travels or it does not, and no factory can reproduce it on request. How to send a sample so the answer is useful Send ten to twenty patches in the original sealed pouch, with the pack if you have one — the pouch, not just the patch, decides the shelf life you can claim. Add one sentence per property you want kept, and one per property you want changed. "Match this, but 30% thinner and no edge lift after six hours" is a specification. "Make it like this" is a lottery ticket. Tell us the destination market too. A patch matched for the US cosmetic route and one matched for an EU device route may need different documentation, and that changes the timeline more than the formulation does. The timeline, honestly Seven days to a sample from the agreed specification, seven days for your approval, and from the purchase order roughly half a month into mass production. Each revision round restarts the seven-day sample clock, which is why the written spec matters more than the number of rounds. Next step Send a photo of the sample and the two sentences above — what to keep, what to change. Start a match request and we will reply with the measurements we can read from the photo and what we need physically.

Can we visit the factory?

Short answer: Yes. The plant is at 1-510 Tongpu Rd., Xihu District, Hangzhou 310012 — coating, converting, inspection and packing on one site. Tell us a week ahead so the visit lands on a day the lines you care about are running, and sign a mutual NDA first if you want to see client-specific dies or artwork. A visit is worth more than a brochure, but only if you know what to look at. What follows is the route we walk, what we ask before you come, and the four things worth checking while you are on the floor. The route, in production order AreaWhat is there Coating Eight coating lines with 60 cm to 120 cm working width: matrix casting, lamination, backing and liner. Converting Die-cutting, waste stripping, slitting and the print stations — the step where your die line and artwork become physical. Inspection Incoming material checks, in-process checks, and the instruments behind the numbers: thickness gauge, tensile tester, pH meter. Packing and warehouse Pouch sealing, cartoning and lot coding, plus the retention samples that make a two-year-old claim checkable. What we ask before you come Date, headcount and what you want to see. A visitor who wants to watch a specific die run needs a different day from one who wants a general walk-through. A mutual NDA, if your visit involves other clients' work. Dies and artwork on the floor belong to other brands; we will not show them without cover. Signing in advance keeps the visit on schedule instead of sitting in a meeting room. Gowning. Coverall, hood, mask and shoe covers. Nothing goes into the cleanroom that has been outside it — including bags and phones, which stay in the changing area. Cameras. Photographs of equipment and of your own job are fine. Photographs of another client's product are not, with or without the NDA. Four things worth checking on the floor Are the dies labelled with client codes, or with brand names? A rack labelled "Acme" leaks who your co-tenants are. A coded rack is a factory that has thought about it. Is the calibration sticker on the gauge in date? Pick the thickness gauge up and read the sticker. It is the fastest single test of whether the quality system reaches the bench. Are batch records filled in at the line, or written up afterwards? Paper on the machine with entries in real time is a working system. Records that appear from an office are a reconstruction. Do retention samples exist for last year's shipments? Ask to see the cabinet. A factory that keeps samples can answer a claim; one that does not can only deny it. What you will not see Other clients' artwork and dies, and any licensed character tooling without the licence holder's consent. If a line is not running that day we will say so rather than stage a run for the visit — a stopped machine tells you as much as a moving one. Getting there The nearest international gateway is Hangzhou Xiaoshan (HGH); Shanghai is the alternative for visitors combining several factories in one trip. Send your arrival details with the visit request and we will fit the schedule around your flight rather than the other way round. Next step Send the dates you are considering and what you want to inspect. Request a factory visit — we will confirm the day, the gowning requirements and the NDA in one reply.

Can you sign an NDA before we share artwork and dielines?

Short answer: Yes, and we sign it before you send anything sensitive — not after. A mutual NDA covers artwork, dielines, formulations and volumes. It costs one email and removes the reason most brands delay the first real conversation. What buyers usually want to know is narrower than the legal question: if I send my design, who inside the factory sees it, and what stops it appearing on someone else's packaging next season. That is answerable in plain operational terms. What the NDA should actually cover A one-page mutual NDA is enough if it names the right things. Generic confidentiality language leaves the useful parts ambiguous. ClauseWhat it must say for you Artwork and dielines Files are yours, returned or destroyed on request, not reused for any other client. Tooling Die and print plates belong to you once the fee is paid, stored for your orders only. Formulation If we develop a matrix for you, it is not offered to another buyer in the same market. Reference use No client name, photo or sample in our marketing without written permission — including licensed character work. Who sees your files, in practice Confidentiality is an access-control problem before it is a legal one. The answer that matters: Two people, by name. An account manager and one production engineer. Prepress receives the file only when a job is scheduled, and the file is version-locked with a date and a hash. No shared drives across clients. Artwork lives in a per-client folder; the die goes into a rack position assigned to you, labelled with your client code rather than your brand name. Nothing is published. Samples shown in our portfolio — including IP work — are covered by the client's permission, because the licence sits with the brand owner and our client, not with us. Three clauses that cause friction Governing law. Chinese suppliers usually propose PRC law; US buyers propose their own state. For an order of this size, agreeing to the buyer's law with a named arbitration venue is common and rarely a deal-breaker. Residuals. Suppliers sometimes ask to exclude "general know-how" from confidentiality. For a hydrocolloid matrix this is where the real risk sits — define it narrowly or refuse it. Term. Three to five years is standard. Tooling and artwork ownership should survive the term. Next step Ask for our mutual NDA template, or send yours — we mark it up within one business day. Start the conversation and the first document you receive will be the NDA, not a catalogue.

Do you manufacture acne patches in your own factory or trade through a third party?

Short answer: We manufacture. Henso runs eight coating lines with working widths from 60 cm to 120 cm. In 2025 we shipped more than 27 million boxes — 216 million sheets, or 25.9 billion individual dots. Those are our own production and shipment figures. The question is worth asking anyway, because in this category a large share of "factories" are trading offices with a website and a forwarding agent. The good news: the difference is testable in about ten minutes, and it does not require you to trust anyone's About page. Three checks that separate a line from a middleman CheckWhat the answer reveals Line width, not line count A trader cannot answer. Width decides how many patches fit one pass, which decides your unit price long before quality comes into it. Who owns the die Once you pay the tooling fee the die is yours. A supplier who will not say that is either renting someone else's die or plans to reuse it. Batch records Ask for the record of a batch shipped last month, with coating parameters and the in-process checks. Trading offices do not hold these. What "own factory" actually buys you Three things change when the person quoting you can walk to the line: 1. Change requests move at production speed. A thickness change or a new die layout is a scheduling decision, not a negotiation between two companies. In practice this is the difference between a two-week sample cycle and a four-week one. 2. Quality conversations reference the same documents. When a batch is questioned, the answer is the coating record and the in-process check sheet, not an email chain with a third party. 3. Tooling stays where you can see it. Your die sits in our workshop, runs only your orders, and can be shipped to you if you move. That sentence is only meaningful if the workshop exists. Asking without an audit You do not need to fly to Hangzhou for a first order. Ask for three artefacts and check they are consistent with each other: a factory tour video shot in one take (not a stock clip), a batch record from a recent shipment, and a die drawing with your name on it. Inconsistency between them usually shows up faster than any claim does. If a visit is on the table, book it against a production day rather than a quiet one, and ask to see the line that will run your thickness. A clean room with no work in progress tells you very little. The honest limits "Own factory" is not the same as "does everything". Coating and converting are ours; some printing, pouch making and carton work are done by long-term partners whose quality we carry. That is normal in this industry and we say which is which, because a buyer who discovers it later assumes the worst. Next step Send your thickness, shape and monthly volume, and ask for the line width and die ownership in writing. Get a specification review — we answer with the line assignment, not a brochure.

Can acne patch packaging be plastic-free or recyclable?

Short answer: Partly, and the honest answer depends on which layer you are asking about. The carton can go plastic-free today. The pouch cannot be both fully plastic-free and a good moisture barrier, and a hydrocolloid patch is sensitive to humidity. What is achievable is a pack that is mono-material, or paper-forward with a thin functional layer, and the trade-off is shelf life. Any supplier who offers "100 % plastic-free" with no change to the shelf-life declaration is skipping that trade-off. Where the plastic actually is Component Typical material Can it be removed? Outer carton Coated or uncoated board, often FSC certified Already plastic-free; uncoated board recycles more easily Primary pouch PET/AL/PE laminate, metallised film, or mono-PE This is the hard one; it is the moisture barrier Blister lid stock Coated aluminium or coated paper Paper-based lid stock exists; seal window is narrower Release liner Silicone-coated PET film, sometimes glassine paper Paper liner is available; it must still release cleanly Print and adhesive Inks, varnish, laminating adhesive Invisible to the buyer but decisive for recyclability Note how much of the pack is not the bag. A brand that changes the carton to uncoated board and the liner to glassine has already removed two plastic components without touching the barrier layer, which is usually the cheapest visible win. The barrier problem, stated honestly Aluminium blocks water vapour almost completely, which is why foil pouches carry the longest declarations. Mono-material PE or PP films are recyclable in the streams that accept them, but their moisture barrier is one to two orders of magnitude worse. The hydrocolloid matrix is hygroscopic; it will take up that moisture, soften, and lose tack before its label date. There are only three ways out, and each costs something: Thicker mono-film — better barrier, more material, higher unit cost, and a pack that still may not match foil Shorter declaration — simplest and most honest; the pack becomes recyclable, the date becomes 12 or 18 months Paper-forward structure with a thin barrier layer — paper outside, minimal functional film inside; recyclable in paper streams in some markets, not all "Recyclable" is a local claim, not a global one Whether a pouch counts as recyclable depends on what the local collection system does with it. Flexible film is accepted in some European schemes and almost never in US kerbside collection. The EU packaging rules under PPWR and the national EPR schemes push design requirements and fees onto the brand placing the pack on the market; the UK's OPRL and the US How2Recycle labels exist precisely because the answer changes at the border. So the specification should name the market, not the word. "Recyclable in DE and NL kerbside, not accepted in US kerbside" is useful. "Eco-friendly packaging" is not, and it is the kind of line that draws scrutiny from a retailer's compliance team. Three packs you can actually order Option What changes What you give up Baselinefoil pouch, coated carton Nothing; longest barrier and longest declaration Recyclability claim; a laminated pouch is landfill in most markets Improveduncoated carton, glassine liner, mono-PE pouch Mono-material film, plastic-free carton and liner Shelf life; possibly a higher minimum order for a new film Paper-forwardbarrier-coated paper pouch Paper stream in the markets that accept coated paper Barrier performance, and a seal window that narrows with print coverage The improved option is what most brands land on: it is visibly different to a buyer, it survives a retailer's packaging questionnaire, and it keeps a declaration that is still defensible. The paper-forward route is worth prototyping when the retail channel demands it, not before. Settle these four before artwork Target markets, because recyclability and EPR obligations are set per country Minimum shelf life you must declare, which decides whether a barrier film is possible Whether the pack ships by sea, where humidity and heat do the real damage Whether the recyclability claim must appear on-pack, which pulls in labelling rules as well as material choice And one caution: compostable and biodegradable are not synonyms for recyclable, and neither may be claimed without certification to a recognised standard. If a supplier offers "biodegradable pouches" without naming the standard and the test conditions, treat it as a colour, not a specification. Henso Biotech produces hydrocolloid acne patches and dissolving microneedle patches from 1,000 units per size and pack format, and can quote foil, metallised, mono-material and paper-forward structures against the shelf life you need. ISO 13485:2016 certified (NQA 69136). Send the market and the declaration target; we will tell you which structure holds both, and what it does to the unit cost.

Does the adhesive hold on oily or sensitive skin?

Short answer: A hydrocolloid patch has no separate glue layer to name. It sticks because the matrix itself is a pressure-sensitive adhesive — typically a blend of sodium carboxymethyl cellulose and a hot-melt rubber phase, or a synthetic acrylic variant. What differs between suppliers is the ratio, the tackifier and the residual chemistry, and those three decide whether the patch survives sebum for eight hours and whether reactive skin tolerates it. Both questions are answered by test data, not by a material name. Two constructions, two failure modes Construction How it holds Where it fails Single layerhydrocolloid matrix only The whole disc is adhesive; grip increases as the matrix takes up moisture Soft matrix creeps on oily skin; the rim rolls and collects lint Two layercarrier film plus matrix, acrylic edge A thinner, harder adhesive ring takes the load; the centre stays soft A hard edge that leaves residue, or a step where matrix meets ring On a face patch, the edge does most of the work. That is why the rim geometry — tapered rather than sheared — matters as much as the adhesive chemistry, and why a change of die can feel like a change of glue. The four measurements that settle it Every adhesive argument becomes short once these are on the table. Any supplier quoting a patch without at least the first two is quoting a feeling. Test What it answers Why it matters to a buyer Tackprobe or rolling ball How quickly it grabs on contact Predicts whether a customer can place it once and leave it Peel adhesion180°, reported per 25 mm Force needed to lift the strip, on steel or on skin-mimic The number behind "it lifted after an hour" complaints Shearstatic load, hours to slip How long it resists sliding under sideways force Overnight wear and movement while sleeping Sebum resistancepeel after oil exposure How much grip survives contact with skin oil The gap between a lab result on steel and a real face Peel on stainless steel flatters every patch. Ask for the same test after a sebum or oil soak, and the ranking often changes — a formula that reads strong on steel can be the first to slide on a forehead at hour three. Oily skin: grip versus creep Sebum lowers the surface energy of skin, so the adhesive has less to bond to and more to slide on. There are three levers, and only the first is free. Prep. A patch applied over a cleansed, dry face holds far better than one applied to a face wiped with a moisturising toner. The residue from a cream is a release layer in everything but name. Construction. A harder acrylic edge resists creep better than a soft hydrocolloid rim. This is the usual reason a two-layer patch outperforms a single-layer one on combination skin, at a higher unit cost. Geometry. A thinner patch with a tapered edge has less material to catch and lift. Going up a diameter to cover a cluster, rather than overlapping two patches, also removes the seam that fails first. Sensitive skin: what to leave out Reactivity is rarely about the polymer backbone. It is usually about what was added to make the adhesive cheap and aggressive: rosin esters, low-molecular-weight tackifiers, solvent residues from a coating line that runs too fast, or a fragment of the release liner's own coating transferred to the patch face. Two practical consequences. First, a hot-melt construction without solvent is easier to defend than a solvent-coated one, because there is no residual solvent to chase. Second, "fragrance-free" and "hypoallergenic" are marketing words, not test results; the defensible statement is a named composition and a batch-level declaration, not an adjective. What to write into the purchase order Construction and matrix composition, stated per layer rather than as a category Peel adhesion with method, substrate and dwell time — plus the same figure after oil exposure Shear target and the wear duration it is meant to support Explicit exclusions: no rosin ester, no added fragrance, no solvent-based coating, if that is the claim you intend to make Edge profile, because a tapered rim and a sheared rim are not interchangeable in use A supplier who can answer all five in one document is telling you something more useful than any sample: that the adhesive is specified, not improvised. Henso Biotech coats and die-cuts hydrocolloid acne patches in 8, 10, 12 and 15 mm plus custom shapes, from 1,000 units per size and pack format. ISO 13485:2016 certified (NQA 69136), U.S. FDA-registered facility. Send the skin type you are formulating for and the wear time you need; we will match the construction and quote the peel and shear data with it.