Samples, Golden Sample and Approval

Samples, Golden Sample and Approval

Summary

Most disputes are not about quality. They are about what “approved” meant. A sample round has three separate outputs, and if the words “golden sample” never appear in writing, the third one does not exist.

Samples, Golden Sample and Approval

Most disputes are not about quality. They are about what “approved” meant. A sample round has three separate outputs, and if the words “golden sample” never appear in writing, the third one does not exist.

The three artefacts in a sample round

Artefact
What it is
What it decides
Who keeps it
Colour proof
A printed patch face or a Pantone-matched film chip
Colour only — not absorbency, not die
Both sides, referenced in the PO
Trial sample
A finished, packed patch from a pilot run
Whether the construction works in the hand
You, for testing
Golden sample
The signed trial sample, sealed and dated
Everything — the reference for every later batch
One sealed copy each; ours is the comparison standard

The first two are working documents. Only the golden sample has authority, and only if it is signed, dated, and stored sealed on both sides.

Samples run 7–10 days. Approval is the slow part.

We can put a trial sample in a courier’s hands in 7–10 days. What determines your launch date is how many rounds it takes to sign, and that number is decided before the first parcel leaves:

Gate
What is being checked
Typical reason it comes back
1. Construction
Film, adhesive, thickness, absorbency
Thickness approved on a photo, rejected in the hand
2. Die fit
Shape, edge taper, release liner cut
Corner radius changed after the die was quoted
3. Print
Colour against the proof, registration, finish
Judged under office light instead of D65
4. Pack
Pouch seal, carton, barcode, artwork text
Responsible-person block added after proofing

Two rounds is normal. Three is a warning sign, and it usually means the first round was approved by email rather than on a physical sample.

“Looks good” is not an approval. A signed, dated golden sample is. Everything else is a conversation.

Clipboard and documentation on a shipping carton
Each gate should leave a dated record — otherwise the next batch is judged against memory.

What the golden sample locks

Once sealed, these six things stop being negotiable for the life of the SKU:

Film source and thickness · adhesive type · die geometry · print colour and finish · pouch structure · carton and barcode layout.

Change any one of them and it is a new golden sample, a new approval, and usually a new production slot. That is not bureaucracy — it is what protects you when a batch arrives and something looks different.

Four clauses worth putting in the PO

1. Sample fee and credit. State the fee and whether it is credited against the first bulk order.

2. Revision limit. Two rounds included, a fee per round beyond that. This is the single most effective way to shorten a project.

3. Retention period. How long each side keeps the sealed golden sample — 12 months past the last shipment is a common floor.

4. Expiry. A golden sample older than 12 months is re-confirmed before a repeat order, because films age and adhesives drift.

Where production sits against it

Bulk runs 25–35 days from approved golden sample and deposit. Minimum is 1,000 units per design at our Hangzhou facility (ISO 13485, cert. 69136), and we quote against 8 coating lines and 28.8 million sheets a month.

Tell us the SKU and we will send the sample schedule with the revision policy attached.

Request a sample schedule